Why Buy an Omega Welding System?

Precision and Power

Select power in 0.2 Ws increments up to 200 Ws —That’s over 20,000 available power settings! Weld spot sizes range from microns all the way up to 4.5mm.  Whatever it is you weld, your Omega has the power to get the job done precisely.

Full Touch Screen

The Omega touch screen gives you complete control of your welder with an easy to use interface. No knobs or dials, just one touch access to everything you need including a multimedia page full of instructional videos and documents. This makes our welders intuitive to use and easily upgradeable for future features as they are released in free software updates.   

Weld Ignition

This technology prolongs the life of the electrode by monitoring and lifting the electrode prior to releasing the weld. This safeguards the electrode from misfires and sticking to the workpiece. In turn, you spend more time welding and less time sharpening an electrode.

Weld Speed Modes

Take control of the speed of your system. Select one of two modes — single (1 weld p/sec) or rapid (up to 5 welds p/sec) and keep the work pace at the speed you want—not where the welder dictates.

Highest Quality Standards

When you purchase an Omega, take confidence in knowing that it was designed, produced, and assembled to the highest quality standards in the industry—in other words, it’s the best you can buy.

Superior Customer Service

Before, during, and after the sale, we want to be your resource for years to come. We guarantee that every interaction with our company will be courteous and friendly in answering your questions or helping in any way we can.

Omega Features!

Adaptive Weld Ignition Mode

Automatically adjusts weld timing to adapt to varying pressure applied to the electrode by the user. This provides for more consistent weld results. Less variation in the weld timing allows for more predictable results. Adaptive Weld Ignition also allows for less variation between different users.

Advanced Low Current Ignition

Automatic smart adjustment of pre-weld current to provide the best weld possible. Whether you are welding on a small microscopic wire or a large thick piece, the i Series will automatically adjust the Pre-Weld current to match your weld. This will provide you with even more consistent welds at any power level.

Dynamic Energy Adjustment

Adjust weld energy up or down without touching the screen.  When this mode is active, operators may press the foot pedal to momentarily change the weld.  Users can choose to increase or decrease the weld energy by up to 50% while the foot pedal is pressed.  This can be useful for making energy adjustments without using hands or looking away from the scope.

Mini -Screen for Quick Settings Adjustment

A small section of main screen is customizable to display a variety of important information. The mini screen has helpful weld settings that can be adjusted from the main screen without having to enter the main settings screen. This allows for quick adjustment to find the perfect weld settings even easier. The mini screen can be used for a number of purposes with a large selection of options.

Description Mode

Not sure what that button or features does, or why it is important? Description mode uses the mini screen to help explain the last used feature. A brief description and helpful tips are included in the mini screen. This is a must for a new user or anyone trying to better understand the features of this machine.

Improved Classic Waveform Performance

With continual improvement aiming to get the best possible weld, the i series comes with an improved Classic waveform. Triangle and Square waveforms are still available. This improved classic mode will give even better welds in classic mode, which will result in a smoother finish and less polishing after welding.

Welding Made Simple - The 3 step process to setting your weld parameters.

The Orion 200i Basic Screen makes it easy to find the perfect settings for your weld

1. Select the metal you are working with to setup the optimum waveform.

2. Select your joint type to get the best weld ignition.

3. Select your power to achieve the best melt spot.

Additional Weld Parameter Options

Weld Speed

Select Trigger Type then push Play.

How to trigger your weld

In Pulse Arc welding the Arc Gap is vitally important in both a good weld and a constant weld. The Orion Sylus Handpiece has a built-in retract feature that will produce the perfect weld gap every time. This allows for a perfect, consistent weld gap every time you weld. Below are the simple trigger options that are quick, easy and precise.

Touch Detect

Every Orion Welding System uses “Touch Detect” weld activation. This is the recommended trigger operation for pulse arc mode because it allows you quick, accurate, and simple weld triggers, However in Tack mode foot pedal is best. “Touch Detect” is used by simply connecting the ground and touching the electrode to your workpiece, and let the machine do the rest. Touch Detect allows you to work without having to constantly search for a foot pedal. All of the parts needed are easily in sight and within reach. Touch detect also allows you to trigger welds with greater precision, as you touch exactly where you want the weld to be. There is no missing & hitting your fingers or out of focus welds, just perfect weld each time you touch the piece.

Foot Pedal

Most of the Orion Welding systems(Excluding mPulse) include the “Foot Pedal” trigger system. This includes the foot switch that will allow you to trigger the welds only when the foot pedal is pressed. The foot pedal is recommended when using the Tack function. This is great for when you need extreme precision. You simply connect the foot switch into the unit, select “Foot Pedal” on the main screen. You bring the electrode into contact with the piece, and once everything is in perfect position press the foot pedal. This feature is especially handy when welding in a groove, or pocket, this will prevent you from welding on the sides, and ensure that you get the weld where you want it.

What comes with your Omega Welding System?

Every Omega Welding System includes the following items:

Power Cord
(International Converter Included)

Alligator Grounding Clips
(2 Count)

Stylus Hand Piece
(Pre-Installed with 1.0mm Collet)

Jump Ring Pliers
(2 Count)

Tungsten Electrodes
(Package of Five 1 mm)

Shuttered Microscope
(Mounted on Articulating Arm)

Argon Tubing
(1/4″ OD Clear Argon Tubing)

Microscope Eye Covers
(1 Set)

Hex Wrench Set
(Every Hex wrench used on the Orion included)

0.5mm & 1.0mm Collets
(For use with Orion Tungsten Electrodes)

Foot Pedal
(Used to precisely trigger welds)

Fiberglass Brush
(Used to clean blackness from weld area)

Diamond Disc
(For Use with any Rotary Tool to Sharpen Electrodes and Clean them)

Introducing the Sunstone Circle Protection Plan

HOW A SMALL MONTHLY SUBSCRIPTION CAN PROVIDE A LARGE UMBRELLA OF PROTECTION!

For your welder, it's a scary world out there! Welders get dropped, get abused, or just stop working. You have to protect your welder for any unfortunate incident. And the Sunstone Circle Protection Plan is an innovative way to safeguard your welder investment.

The Sunstone Circle is much, much more than an extended warranty. Here's what a small monthly subscription will deliver in peace of mind and exceptional customer service:

Sunstone Circle Protection Plan

Forever Warranty
For as long as your welder is covered by the Sunstone Circle your warranty never expires. You’ll never deal with lifeless warranty extensions, but rather enjoy a forever warranty. And that’s a big circle of protection!

Complimentary Loaner
If you need a loaner unit while your welder is being repaired, we’ll send one. We’re going to do all we can to keep your production levels up. If you’re in the circle, we’ll take care of you!

Free Replacement
Sometimes it makes more sense to simply replace a welder with the newest model rather than make a repair. At Sunstone’s discretion, we’ll send you the newest model to keep your shop happy and healthy!

Free Software Upgrades
When your welder is powered by the latest software improvements your shop becomes more productive and capable. You’ll have access to all software upgrades when you join the Sunstone Circle!

Complimentary Shipping
Should your Sunstone welder ever need repair, we’ll cover the shipping costs for ground service within the United States. If you need it faster, simply pay the difference. Need it shipped internationally? Give us a call!

Expedited Customer Service
At Sunstone every customer is a VIP, but when you’re part of the circle your request for customer service gets moved to the front of the line. You get extra attention! Just another perk when you subscribe today.

More Valuable Member Benefits!
You’ll receive snazzy Sunstone swag, a subscription to Micro Welding Today magazine, invitations to VIP events, Inside the Circle e-newsletter, and new product trial opportunities. Call now to join the circle!

Learn More!

We Deliver Worldwide

Shipping Terms

1. Unless indicated otherwise in the Acknowledgment, Delivery shall be made EXW (Incoterms 2010), Shipping Point, including without limitation, freight, and insurance costs. If no delivery terms are specified on the Acknowledgement, the method of shipping will be at the sole discretion of Seller. Unless directed in writing otherwise by Buyer, full invoice value will be declared for all shipments.

We accept the following payment methods:

Return Goods Policy. 

Seller’s products may be returned to Seller for credit within thirty (30) days of the shipment subject to the following conditions.

Sunstone offers a 30-day return policy on all products. Before sending a product back please contact Sunstone to receive an RMA number. The RMA number should appear clearly on the outside of the package. Customers are refunded via check. Please note that a 10% restocking fee will apply to all returns. A 30% restocking fee will apply to all 3rd party products (laser welders, laser engravers, PW - AC Welders, and AVIO products). Additionally, all 3rd party products must be insured when sent back to Sunstone at the buyer’s expense. In some cases, a merchant fee may apply. Equipment damaged by improper use or insufficient shipping precautions will be charged additional fees.

*DADO Laser Welder – No cash refunds available for the dado laser welder. However, The Dado Laser Welder may be returned within 30 days for credit towards another Orion or Sunstone product.

*Argon tanks have a $35 restocking fee, the tank must be emptied and left open with the protective cap put in place. All hazardous material and compressed gas stickers need to be removed from the packaging as the empty cylinder is not hazardous and doesn't contain compressed gas.

*Refunds will not be issued for services that have already been rendered such as shipping, calibration, or trainings.