Orion LZR Benchtop Laser Welder
The Orion LZR is availabl in 80, 160, 200 and 240 joule power options (A smaller 35 joule option is also available). The Orion line is a brand of powerful benchtop laser welders with technological and engineering features that surpass the competition.
The Orion LZR: More Premium Features without the Cost!
An Orion laser micro welder from Sunstone lets you accomplish extraordinary welds in the most difficult of places. With a laser, if you can see where a weld needs to be, you can reach it. You will appreciate the ability to use the laser to smooth and polish a work area or fill porosity in half the time. With a laser, there’s no electrode maintenance to interrupt your work, which saves time. Sunstone offers four different power options to fit your budget so that your studio or factory can easily justify an Orion laser micro welder.
Sunstone's Orion Benchtop Laser Welder Features
- Large touchscreen interface
- Slider bars for making quick adjustments
- Joystick control inside the weld chamber
- Built-in HD camera
- HDMI output for displaying camera feed on a TV
- Leica 10x Optics
- 3 year warranty
- Argon hookups for shielding gas
- Compressed air hookups with nozzle inside weld chamber for cooling off welded pieces
- Water cooling system uses a resin sack instead of a water filter
- Less maintenance as the resin sack can go years without needing to be replaced
- Flashlamp is rated at +/- 5 million shots
- Dual fans and radiators for better cooling
- Open-bottom weld chamber- the bottom of the chamber can be dropped out of position to accommodate large or heavy items
- 180 degree open weld chamber- you can feed pieces in one side and out the other
More Efficient Laser Optic Rail
Our more efficient laser optic rail delivers more energy into the weld resulting in less energy being lost lost internally through heat dissipation. Because of this efficiency, an Orion laser micro welder from Sunstone gets more joules of energy using less kilowatts of peak weld energy. This efficiency also increases the life of the Orion laser welders flash lamp and overall life of the laser.
Orion Laser Welders Run Cooler
Two ventilation fans keep the Orion laser welders running cooler. Additionally, the weld chamber is lit up with LED lights rather than halogen. This makes the weld chamber significantly cooler. Less heat equals less strain on the system which makes it even more efficient!
Simple to Use Benchtop Laser Welder
At Sunstone, we create products to make your life simple. The LZR benchtop laser welders are no exception. As a result, our laser welders are built with the end user in mind. We provide a full touchscreen interface that allows you to easily adjust settings from minimum to maximum in a single touch.
Sunstone's Orion Benchtop Laser Welder Applications
- Weld precious and non-precious metals
- Add Metal
- Small wires
- Bond dissimilar metal
- Weld porosity or cracks using filler material
- Repair watches, eye-wear and other minutia
- Weld dental & orthodontic appliances
- Repair antique jewelry
- Repair jewelry settings without removing stones
Sunstone's Orion Benchtop Laser Welder in Action
Orion LZR Series | ||||
| LZR 80 | LZR 160 | LZR 200 | LZR 240 | |
AVERAGE POWER | 100 W | 100 W | 100 W | 100 W |
| PEAK POWER [KW] | 3.5 kW | 6.58 kW | 8 kW | 10 kW |
| ENERGY RANGE | 0.1 - 80 J | 0.1 - 160 J | 0.1 - 200 J | 0.1 - 240 J |
| LASER SOURCE: WAVELENGTH | Nd: YAG 1064 nm | |||
| IMPULSE TIME | 0.1 - 25 ms | |||
| WELDS PER SECOND | 1 - 30 | |||
| SPOT DIAMETER | 0.2 - 2.0 mm | |||
| PROGRAMS | 6 Pulse Shaping Presets | |||
| MEMORIES CELL STORED | 100 | |||
| CONTROL JOYSTICK | On Board | |||
| EXTERNAL CONTROL | Color Touch Screen | |||
| INPUT POWER | 110 or 230 V AC, 50/60 Hz, single | |||
| AMPERE | 10A | |||
| MAX DIMENSIONS [LxWxH] | 76x53x56 cm | |||
| TYPE | Benchtop | |||
| ARGON / AIR NOZZLE | Yes / Yes | |||
- Laser Welder Specifications
-
Laser source and wavelength NDYAG 1064 NM
-
Impulse time0.1 – 20 ms
-
Spot diameter0.2 – 2.0 mm
-
External controlColor Touch Screen
-
Dimension76 x 53 x 56 cm
-
Input power110 V AC, 50/60 Hz, single
-
Power system, number of phases1
-
Average power75 - 180 W
-
Max power5 - 9 kW
-
Ampere10A
-
Frequency0.5 – 30 Hz
-
CoolingLiquid and Air
-
Microscope20x
-
Energy [Joule]0.1 – 180 J
-
Waveforms6 Preset Waveforms
-
Saveable Programs100
-
User InterfaceTouch Screen
-
Argon / Air NozzleYes
-
We Deliver Worldwide
Shipping Terms
- Unless indicated otherwise in the Acknowledgment, Delivery shall be made EXW (Incoterms 2010), Shipping Point, including without limitation, freight, and insurance costs. If no delivery terms are specified on the Acknowledgement, the method of shipping will be at the sole discretion of Seller. Unless directed in writing otherwise by Buyer, full invoice value will be declared for all shipments.
Return Goods Policy.
Seller’s products may be returned to Seller for credit within thirty (30) days of the shipment subject to the following conditions.
Sunstone offers a 30-day return policy on all products. Before sending a product back please contact Sunstone to receive an RMA number. The RMA number should appear clearly on the outside of the package. Customers are refunded via check. Please note that a 10% restocking fee will apply to all returns. A 30% restocking fee will apply to all 3rd party products (laser welders, laser engravers, PW - AC Welders, and AVIO products). Additionally, all 3rd party products must be insured when sent back to Sunstone at the buyer’s expense. In some cases, a merchant fee may apply. Equipment damaged by improper use or insufficient shipping precautions will be charged additional fees.
*DADO Laser Welder – No cash refunds available for the dado laser welder. However, The Dado Laser Welder may be returned within 30 days for credit towards another Orion or Sunstone product.
*Argon tanks have a $35 restocking fee, the tank must be emptied and left open with the protective cap put in place. All hazardous material and compressed gas stickers need to be removed from the packaging as the empty cylinder is not hazardous and doesn't contain compressed gas.
*Refunds will not be issued for services that have already been rendered such as shipping, calibration, or trainings.
