The Precision Micro-Welder Technology You Need!
The Orion 150s Professional is the ideal welding tool for any micro welding laboratory application. The s Series welders can be seen in laboratories, universities and research & development institutions around the globe.
The Orion 150s Professional boasts a power potential of up to 150 joules of pulse-arc weld energy. While powerful, the 150s Professional is perfect for low power needs as well—yielding as little as 1 joule of energy. Even with such a large range in power, full control is maintained as the 150s Professional is adjustable in 0.2 joule increments. Whether an application requires high power welding needs or intricate, precise welds around precious components, the Orion150s Professional offers a versatile, compact, and affordable labratory welding system in an easy-to-use package.
150s Introduction Video
How Does it Work?
Electrical Energy – Plasma Discharge
Pulse Arc welding uses electrical energy to create a plasma discharge. The high-temperature plasma, in turn, melts metal in a small spot. This process takes place in milliseconds. The process is clean and very controllable – perfect for intricate and minute welding applications on precious and non-precious metals!. Filler metal can also be added to build up joints and create strong and reliable weld “beads”, or weld seams.
Two in One Combo
The Orion is a pulse-arc welder and a capacitive discharge resistance welder in one. This combination of abilities allows for infinite creative possibilities. In its Tack Mode, the Orion can be used to temporarily position parts before welding or soldering. In its Pulse Arc Mode, the Orion can be used to perform permanent welds, add metal, and do a variety of other amazing and time-saving applications.
Why Buy an Orion?
Precision and Power
Select power in 0.2 Ws increments up to 150 Ws —That’s over 1000 available power settings! Weld spot sizes range from microns all the way up to 3.5mm. Whatever it is you weld, Orion has the power to get the job done precisely.
Full Touch Screen
The Orion touch screen gives you complete control of your welder with an easy to use interface. No knobs or dials, just one touch access to everything you need including a multimedia page full of instructional videos and documents. This makes our welders intuitive to use and easily upgradeable for future features as they are released in free software updates.
This technology prolongs the life of the electrode by monitoring and lifting the electrode prior to releasing the weld. This safeguards the electrode from misfires and sticking to the workpiece. In turn, you spend more time welding and less time sharpening an electrode.
Weld Speed Modes
Take control of the speed of your system. Select one of two modes — single (1 weld p/sec) or rapid (up to 5 welds p/sec) and keep the work pace at the speed you want—not where the welder dictates.
Highest Quality Standards
When you purchase an Orion 150sProfessional, take confidence in knowing that it was designed, produced, and assembled to the highest quality standards in the industry—in other words, it’s the best you can buy.
Superior Customer Service
Before, during, and after the sale, we want to be your resource for years to come. We guarantee that every interaction with our company will be courteous and friendly in answering your questions or helping in any way we can.
|Display (Touch Screen):||8” Full|
|Welder (L x W x H):||12” x 6” x 10” (30.5 x 15.2 x 25.4cm)|
|Save Settings Spaces:||100|
|USB/WIFI Upgradable Software:||Yes|
|Energy (min-max in Joules):||1 – 150|
|Current (min-max in Amps):||6 – 900A|
|Length (min-max):||1 – 60ms (shown as a %)|
|Estimated Weld Spot Diameter Range:||≈ 0.5 – 3.5mm|
|Max Welding Speed (Hz):||2Hz|
|Max Charging Time:||1.2s|
|Single Fire Mode:||1 weld/0.5 seconds|
|Rapid Fire Mode:||Yes 1-5 Welds/Sec|
|Adaptive Weld Ignition:||N/A|
|Arc Start Technology:||Yes|
Tack Mode Specs
|Energy (min-max in Joules):||5 – 150|
|Peak Current (min-max in Amps):||4,000A|
|Length (min-max):||5 – 60ms|
5x Microscope Specs
|Vertical Stylus Working Space:||~110 mm|
|Automatic Eye Protection:||Auto Darkening Lens|
|UV Protection:||> UV 16|
|IR Protection:||> IR 16|
Welding Made Simple
The 3 step process to setting your weld parameters.
Orions Basic Screen makes it easy to find the perfect settings for your weld.
1. Select the metal you are working with to setup the optimum waveform.
2. Select your joint type to get the best weld ignition.
3. Select your power to achieve the best melt spot.
Additional Weld Parameter Options
Select Trigger Type then push Play.
How to trigger your weld.
In Pulse Arc welding the Arc Gap is vitally important in both a good weld and a constant weld. The Orion Sylus Handpiece has a built-in retract feature that will produce the perfect weld gap every time. This allows for a perfect, consistent weld gap everytime you weld. Below are the simple trigger options that are quick, easy and precise.
Every Orion Welding System uses “Touch Detect” weld activation. This is the recommended trigger operation for pulse arc mode because it allows you quick, accurate, and simple weld triggers, However in Tack mode foot pedal is best. “Touch Detect” is used by simply connecting the ground and touching the electrode to your workpiece, and let the machine do the rest. Touch Detect allows you to work without having to constantly search for a foot pedal. All of the parts needed are easily in sight and within reach. Touch detect also allows you to trigger welds with greater precision, as you touch exactly where you want the weld to be. There is no missing & hitting your fingers or out of focus welds, just perfect weld each time you touch the piece.
Most of the Orion Welding systems(Excluding mPulse) include the “Foot Pedal” trigger system. This includes the foot switch that will allow you to trigger the welds only when the foot pedal is pressed. The foot pedal is recommended when using the Tack function. This is great for when you need extreme precision. You simply connect the foot switch into the unit, select “Foot Pedal” on the main screen. You bring the electrode into contact with the piece, and once everything is in perfect position press the foot pedal. This feature is especially handy when welding in a groove, or pocket, this will prevent you from welding on the sides, and ensure that you get the weld where you want it.
What comes with the Orion System?
Every Orion System includes the following items:
(International Converter Included)
Stylus Hand Piece
(Pre-Installed with 1.0mm Collett)
Jump Ring Pliers
(5 – 1mm & 5 – 0.5mm)
(Mounted on Articulating Arm)
(1/4″ OD Clear Argon Tubing)
Microscope Eye Covers
Hex Wrench Set
(Every Hex wrench used on the Orion included)
(For use with 0.5mm Tungsten Electrodes)
(Used to precisely trigger welds)
(Used to clean blackness from weld area)
(For Use with any Rotary Tool to Sharpen Electrodes and Clean them)
(Used to regulate the flow of the inert gas)
(Used to pre-tack workpieces or permenant fusion)
Keep Up To Date
Easily keep your Orion up to date using the update over WiFi Function.
Updating Made Simple!
- Select “Update Welder Over WiFi”
- Connect to your Wifi Network
- Ensure internet connection
- Your Orion will search for the most up to date software
- If new software is available, Orion will download and install this for you automatically
- Updates also available through USB if no Wifi is available