The Orion Nano Engravers were developed by incorporating the research and innovations of the Engraver series but with a goal of offering high-quality laser at a more affordable price. Orion Simple Laser engraver help you to have the ability to engrave any metal with little setup, smaller footprint, and the same excellent results.
Similar to the Engraver series, the Nano products are also built using a ytterbium-doped fiber optics and offer the same low environmental impact and low maintenance (up to 50,000 working hours).
They can be used on any metal to engrave text, photographs, logos, and markings. The maximum marking area ranges from 65x65mm to 180x180mm depending on the lens. The standard lens offers a 110x110mm working area with a resolution of 20μm.
The machine is small, with a fully accessible working chamber thanks to the absence of closures and hatches. There are two available models with either 10W or 20W of maximum output power. Maneuvering pieces and configuring setups is very fast and easy, however, unlike the Engraver series, the z-axis is not motor driven and must be adjusted manually. To help position the z-axis appropriately, the engraver machine has an innovative and intuitive focusing system with overlapping laser pointers. The engraver can also be equipped with a video camera for optimization of the processing, and for possible remote assistance.
Software is included with these engravers. The software is capable of importing files from commonly-used computer design programs such as svg, dxf, bmp, plt, jpg, dwg, and others. The software makes it easy to perform any job from engraving an image, engraving text on the inside of a ring, engraving a custom design on a bangle, to marking and cutting custom shaped objects.
Additional options that can be included with the LZR Engraver machines include: high precision rotating axis system for rings and bangles, electro-pneumatic feeder for metal sheets, vacuum exhaust system with filters, XY clamp for positioning pieces, and a pneumatic hatch opening system. For our Full Laser Engraving System Click Here.
|LZR Nano Engraver|
|Output Power:||10W or 20W|
|Wave Length:||1064 nm|
|Position Resolution:||1.7 μm|
|Power Supply:||110 or 230 VAC, 3A, 50/60 Hz, Single Phase|
|Beam Quality:||< 1.5|
|Absorbed Power:||90W or 100W|
|Dimensions:||38 x 53 x 60 cm|
|Fiber Length:||2 m|
|Focal 100: Marking Area / Spot ø:||65×65 mm / 18μm|
|Focal 160: Marking Area / Spot ø:||110×110 mm / 30μm|
|Speed of Galvo Head:||up to 7000 mm/sec|
|Max Pulse Energy:||1 mJ @ 20 kHz|
|Type of Source:||fiber laser|
|Max Frequency:||up to 80 kHz|