Orion Combo 200 Open Laser Welder
The Orion Combo 200 YAG open laser welder was developed primarily for precise welding work on large pieces. The mold & die and plastic injection industries can save thousands of dollars by repairing their pieces instead of replacing them. The Orion open laser allows for those laser welding repairs.
From it’s generator to the fiber optic output, the Orion Combo 200 YAG open laser welder makes fast work of shaping and adding metal to worn or damaged areas on pieces as large as 1000x1000mm. Mounted on an articulating arm, the Orion open laser can easily move to a position needed to make the repairs. The power range is impressive as it is adjustable from 0.1 to 200 joules.
- Pulse-shape settings allow you to configure your pulse to take advantage of specific metallurgic characteristics.
- Superior, high-efficiency components run cooler, reducing stress on critical-wear parts, for notably longer service life and greatly reduced maintenance.
- The Combo 200 ensures close, repeatable control over laser parameters to deliver precise results.
- High-efficiency fiber optics enable a higher average power output from fewer joules.
- User-friendly touch-screen control.
- Advanced constant-voltage inverter power supply eliminates power spikes to allow the laser welder to be more effective and drastically extend the flashlamp life.
- YAG laser
Welding an Exhaust Piece with the Open Laser Welder
- Laser Welder Specifications
-
Laser source and wavelength NDNd: YAG 1064 nm x2
-
Impulse time0.1 – 20 ms
-
Spot diameter0.6 – 2.0 mm
-
External controlNo
-
Dimension50 x 50 x 80 cm
-
Input power230 VAC, 50/60 Hz, Single
-
Power system, number of phases1
-
Average power150 W
-
Max power15 kW
-
Ampere20A
-
Frequency0.5 – 30 Hz
-
CoolingLiquid
-
Microscope20x
-
Energy [Joule]0.1 – 200 J
-
Spot Diameter Adjustments15 positions, Motorized
-
Waveforms6 Preset Waveforms
-
Saveable Programs100
-
User InterfaceTouch Screen
-
Max Arm Extension1200 mm
-
Argon / Air NozzleYes
-
We Deliver Worldwide
Shipping Terms
- Unless indicated otherwise in the Acknowledgment, Delivery shall be made EXW (Incoterms 2010), Shipping Point, including without limitation, freight, and insurance costs. If no delivery terms are specified on the Acknowledgement, the method of shipping will be at the sole discretion of Seller. Unless directed in writing otherwise by Buyer, full invoice value will be declared for all shipments.
Return Goods Policy.
Seller’s products may be returned to Seller for credit within thirty (30) days of the shipment subject to the following conditions.
- In order to return products for credit, the Buyer must obtain an RMA number from Seller. Upon receipt, it must be executed by an authorized person and then returned with the Goods. Goods returned to Seller without an RMA will be returned at Buyer’s expense.
- Goods are to be returned to Seller at 1693 American Way #5 Payson, UT with Freight Prepaid. Seller will not accept collect shipments.
- Restocking fees will be assessed in accordance with the following schedules: (i) Goods returned within the first thirty (30) days from the shipment date will be restocked less six percent (6%) of the amount billed on the original invoice. (ii) No returns are allowed after thirty (30) days from the original shipping date.
- The restocking fees set forth above are the minimum fees. If a returned Good requires rework to restore it to a saleable condition, further charges will be assessed. Seller’s quality assurance department will document the condition of the Goods when received by Seller and report their findings to Buyer. The following Goods cannot be returned, are not eligible for any credit, and cannot be restocked: (i) custom or modified products and (ii) any consumable product(s) that have been used.
*DADO Laser Welder – No cash refunds available for the dado laser welder. However, The Dado Laser Welder may be returned within 30 days for credit towards another Sunstone product.