Welder:
Linear DC
Attachments:
WH1125A – Opposed gap weld head with 1/8” electrode holders
WH2125A – Continue reading
Category Archives: Brass
Pulse Arc Welding Copper Wire to Pins
Welder:
Orion 150i – Micro pulse arc welder with microscope arm package
Attachments:
Pulse arc cross-lock Continue reading
Pulse Arc Welding – 30mil Brass Prongs to 38mil Brass Base
System:
Orion Pulse 150i – Pulse arc and resistance welder
A sharpened 1mm electrode is generally used for this Continue reading
Sensor Tabs to Steel Frame Inside Plastic Body
A sharpened 1mm tungsten electrode is used for this application. The stylus is removed from the microscope assembly and used Continue reading
Braided Wire Terminated to Electrical Contacts
System 1:
Orion Pulse 150i, pulse arc and resistance welder
System 2
Prototype 2500 amp HF welder
WH1125A, Opposed Continue reading
Wires to Electronic Terminals – Multiple Orientations
System 1:
Orion Pulse 150i, pulse arc and resistance welder
A half-blunted 1mm tungsten electrode is used to weld Continue reading
Stranded Wire to Brass Terminal Pads
The WH1125A is configured with an 1/8″ copper electrode in the upper holder that has been tapered and notched to Continue reading
Pulse Arc Welding – 15mil Brass Tab to Brass Connector Rods
System:
Orion Pulse 150i – Pulse arc and resistance welder
A sharp tipped 1mm tungsten electrode is used Continue reading
Stranded Wire to Inside of Brass Ring
The WH1125A weld head is configured with an 1/8″ copper flat tipped electrode in the upper holder that has been Continue reading
Pulse Arc Weld Copper Lead Wires to Brass Terminals
System:
Orion Pulse 1500s – Pulse arc and resistance welder
12awg weld cable on an industrial stylus (3/32″ tungsten electrode)
Continue reading