Contacts to Breaker Components

CD1000DP + WH1125A

1/8″ copper electrodes are used for this application.  The upper electrode has a flat tip and the lower electrode has been bent at a 90 degree angle and flattened along the upper surface for good contact with the parts.  The WH1125A is set to apply 15lb force for the welds pictured and the CD1000DPM2 is set to deliver 1000ws energy.  The coating on the components is removed at the weld site for best results.  Flatter mating surfaces lead to more consistent weld strength and results.

Visit our site to learn more.