- Micro TIG (Pulse-Arc) Welders
- Micro TIG (Pulse-Arc) Accessories
- Resistance Welders
- Resistance Welding Accessories
- Battery Welders
- Battery Welding Accessories
- Laser Welders
- Laser Engravers
- Laser Accessories
- Weld-Head Attachments
- Hand-Held Attachments
- Welder Electrodes
- Welder Accessories
- Welder CNC Tables
- Hot Bar Reflow
- Seam Sealers
- Ultrasonic Welders
- Induction Welding
- Aerospace Micro Welding
- Defense and Military
- Energy and Utilities
- Filtration and Mesh
- General Industrial
- Heating and Cooling
- Motors and Coils
- Oil and Drilling
- Plastics Molds and Dies
- Research and Development
- Battery Welding
- Brachy Seeds & Capsules
- Coil Termination
- Defense & Military
- Dental & Ortho
- Electrical Connections & Fuses
- Energy & Utilities
- Engrave - Mark - Cut
- Eyeglass Frames
- Filtration & Mesh
- General Industrial
- Hearing Aids
- Heating & Cooling
- Heating Elements
- Hotbar Reflow Soldering
- Hybrid Microwave Devices
- Permanent Jewelry Infinity Jewelry
- Laboratory & R&D
- Lighting - Bulbs - Tubes - Lamps
- Medical Surgical Tool Repair
- Mold & Die Repair
- Motors & Coils
- Nuclear Fuel Rods
- Personal Protection Equipment
- Projection Studs
- RF Devices
- Solar Panels & Cells
- Specialty Metals
- Strain Gauges
- Thermo-compression Bonding
- Thermocouple Welding
- Wire and Ribbon
- Our Company
- Free Micro Weld Evaluation
- MOUNTAIN METALSMITHS SCHOOL OF JEWELRY Orion Welders Workshops in 2022
- The Battery Show North America September 13-15, 2022 Novi, MI - USA
- Jewellery and Gem World Hong Kong Sept 16-19, 2022
- JGW Singapore will be held from 27 to 30 September at Singapore EXPO
- Amerimold September 2022 Rosemont, IL - USA
- LMT Lab Day East October 1, 2022 Tarrytown, NY - USA
- MD&M Minneapolis November 2-3, 2022 Minneapolis, MN - USA
- Fabtech November 8-10, 2022 Atlanta, GA - USA
- EBG Battery Conference 2022
- MDM East June 13-15, 2023 NYC - USA
- Micro Welding Tech Podcast
Micro Welding Education
- Micro Welding Explained
- Best Micro TIG and Pulse Arc Welders
- Why Buy an Orion Micro TIG Welder
- Precision Benchtop Laser Welders
- Why Choose Laser Welding
- Battery Welding Lithium Batteries
- Choosing Welders
- Micro Welding Science
- Understanding Agitation
- Understanding Welding Waveforms
- Argon Gas for Micro Welding
- Jewelry Welding Workbook
- Electrode Selection Guide
- Safety Concerns
- Schools and Universities
Argon Gas for Micro Welding
What is Argon Gas?
Argon gas is a chemical element with Symbol Ar, and one of the noble gases. Argon is also the 3rd most abundant gas on earth. Argon is most commonly used as an inert shielding gas. Argon is Colorless, odorless, Non-Flammable, and Non-Toxic.
Why do Sunstone's Orion Welding Systems Use Argon?
Argon is used as a shielding gas in Sunstone's Orion Welding Systems. During the welding, process metals are exposed to temperatures of upwards of 7000 Degrees. At these temperatures, most metals become liquid, which allows the formation of the weld. Argon is used to protect the molten pool of metal against elements in the Atmosphere including Oxygen, Nitrogen, and Hydrogen. These elements cause reactions with the liquid weld pool, such as porosity and increased weld spatter. Argon also plays an important role in maintaining Arc stability, which leads to increased weld penetration, better filler wire transfer, and better weld appearance.
Sunstone's premium argon is 99.996% pure Argon (Argon 4.6). Pure Argon refers to the gas being just Argon, and not mixed with another gas.
Is Argon Dangerous?
Argon has safety concerns to be aware of, but for the most part is a very safe gas. It is non-toxic and non-flammable, therefore it is not poisonous, and it will not burn. Argon does come in a compressed tank, and proper safety protocol should be followed when working with compressed tanks. Argon is 38% denser than air so when working within confined areas ensure that you have proper air ventilation. The amount of Argon used in the Orion system is very small and is of very little safety concern.
What Kind of Argon Gas do I Get?
We recommend using 99.996% pure Argon (Argon 4.6). This is one of the most commonly used welding gasses in the world. Every major gas supply company will carry this. It is the same as welding gas used in a traditional TIG welding Setup. Pure Argon refers to the gas being just Argon, and not mixed with another gas. Other shielding gasses such as CO2 and Argon CO2 mixes, do not work as well as pure argon. Ultra high purity or medical grade Argon is not required.
About How Long Should My Argon Tank Last?
It depends on a number of different factors, such as frequency of use, pressure setting, and pre/post flow settings. Sunstone's premium argon comes in an 80 scf tank, which is the most common size for use with Sunstone's Orion Welding Systems. A 80 scf tank will last 6-9 months on average, depending on use.
Will I Need an Argon Regulator?
Yes, if you do not already have a gas regulator please click here to order the AGR 2 regulator.
We strongly recommend purchasing the AGR 2 regulator from us to ensure that you will have the proper type of regulator to match the tank we send you.
"AGR Inline" regulator will not work with Sunstone's premium argon tanks
What is The Recommended Argon Pressure?
Sunstone's Orion Welding systems work best at around 10 PSI. The pressure can be adjusted depending on the workpiece and how far the electrode protrudes from the welding stylus. The further out the electrode, the more argon pressure will be required in order to get proper coverage.
What systems Use Argon Gas?
Pulse Arc – Micro TIG Welding Systems
All of Sunstone's line of Orion Pulse Arc or Micro TIG welding systems use Argon Shielding Gas to provide a better quality weld and a more stable Arc. Though Argon gas is not required when using the Orino Welding Systems, it is highly recommended for consistent high-quality welds.
The Sunstone line of Orion LZR Laser welding systems offers a wide variety of Laser welding systems from Benchtop to fully automated systems. All of these systems come integrated with an Argon nozzle and Computer-controlled Argon Gas valves, used for shielding Laser welds.
Sunstone offers a wide variety of Resistance Welding Systems for fine spot, micro spot welding. These systems are used for a wide range of applications including batteries, medical devices, industrial applications, Stud Welding, Automotive, Mesh & Screen, and many other applications. Argon Gas is used when required for a higher quality weld, or a better weld appearance.